New CATCLAMP CAT CLAMP Misc

$219 $269

Description

CAT CLAMP
- The CatClamp® is installed by placing the split clamp assemblies in place before and after the converter. The cable is then routed through both split clamps and around or through a durable portion of the vehicle chassis wherever possible and back through both split clamps again. On a vehicle with a frame, the frame and/or cross members are used as durable attachment points, on a vehicle without a frame (unibody construction) anti-sway bar and/or engine/transmission brackets are utilized as durable attachment points.

- The Patented CatClamp® design requires only a 3/8" hole/opening for the wire rope to pass through and secure the CatClamp® to the vehicle chassis. This process is repeated until all cable is consumed, and each of the eight holes in both split clamps is used.

- Lastly, the four bolts are tightened with a standard socket and the included tamper-proof installation tool. As the bolts are tightened, the clamps tighten down equally on the exhaust pipe and cable.

Specifications