HEAVY DUTY MASON DUMP TRUCK BODIES
Body Standard Features
-6” x 8.2 lb. structural channel long sills
-3” structural channel cross members 12 o.c.
-10 ga. steel floor formed with inner side wall
-12 ga. outer wall sides with box formed top and V-formed outside wall with 2 vertical braces
-18” cab shield, with brackets for side boards (various heights available)
-Rear posts 6” higher than sides with brackets for side boards
LED dump body light kit includes marker & clearance lights and 1 stop/turn/tail-light per rear corner post with wiring harness. Meets (FMVSS108)
-Available with 12”, 18”, or 24” sidesStandard width 96” outsideInside width 86-3/4”
-Primered and painted black (other colors available)
Tailgate Standard Features:Constructed with 10 ga. Steel
-Fully boxed frame with two 12ga. vertical posts
-Standard height – 6” higher then sides
-Fully double acting with bottom release lever at driver’s side, -Upper release is quick release screw pin style
-Standard with spreader chains and banjo eye chain holders on rear post
SUPER DUTY DUMP BODY
Our Switch-N-Go® Dumpster Body is available in three standard lengths, 11’, 12′, or 14’ long. Dumpster Bodies come manufactured with single swing gate, and capacities ranging from 14 up to 20 cubic yards based on models. These open-topped dumpsters all come with our black powder coated finish or wet paint finish. dumpsters come with no Seam seal or options. May be produced in two different production facilities. The location will be confirmed when coordinating shipment.
Switch-N-Go® Dumpster Bodies are designed with waste haulers in mind. Manufactured with industry-respected features, including 12GA Sides, single side swing tailgate, and greased wheels, the engineered slope front design coupled with the hoist system’s 50 degree dumping angle will have haulers raving about the efficiency of dumping and container cleanout. The lightweight design also offers a greater payload to the hauler, without sacrificing the structural integrity. More so, the Dumpster body is a lower cost solution as compared to other work truck bodies, allowing haulers the ability to create a successful waste hauling business, while simultaneously operating with the Switch-N-Go® system.
LANDSCAPE DUMPSTER BODY
STANDARD SPECIFICATIONS AND OPTIONS
-3/4″ LED marker and clearance light kit meets (FMVSS108) Includes wiring harness
-Primed and painted black, (other colors available)
-Standard width 96” outside
-89-1/4” inside width
-Structural channel long sills 8’6” – 11’6” . 6” x 8.2 lb. channel -12’6” – 16’6” . 7” x 9.8 lb. channel
-3” 10 ga. formed channel crossmembers 12” o.c.
-4” structural channel rear rail
-10 ga. smooth steel floor with formed side rails
-42” high weld-on bulkhead and sides constructed with 12 ga. sheet, box tubing uprights 24” o.c. and box tubing top rail, other heights available
-1/4” x 2” rub rail (full length both sides)
-Barn door style tailgates with dual cam latch system
LANDSCAPE BODY
Standard Features:
-4” Structural channel long sills
-3” Formed channel cross members – 12” centers
-1/8” Diamond plate floor, including beaver tail
-60” High 1-1/2” steel tubing and mesh bulkhead with 18” side returns and built-in 24” high storage box with lockable drop down door
-Perimeter wall – 1-1/2” steel tubing
-18” High expanded metal permanent-mount sides
-72” Long (92” wide) expanded metal spring-assisted loading ramp
-4 D-Rings on floor per side (more optional)
-Primed and painted black (other colors available)
-4′ rear beaver tail with 12″ drop
-6” LED oval stop/turn/tail and reverse lights with marker and clearance light kit. Meets (FMVSS108) Includes wiring harness
SUPER DUTY FLATBED BODY
Standard Features:
-48” high weld-on bulkhead with mesh window. Also available in -54”, and 60” high
-3/4″ LED Marker and clearance light kit meets (FMVSS108) Includes wiring harness
-Primered and painted black (other colors available)
-Structural channel long sills | 12’6” – 18’6” 7” x 9.8 lb. channel | -20’6” – 26’6” 8” x 11.5 lb. channel
-4” Structural channel crossmembers 12” o.c.
-6” Structural channel rear and side rails
-7 ga. smooth steel floor
-3/16” heavy duty exterior stake pockets with 3/8” x 3” rub rail on sides and rear
-Standard overall width 96” (optional 102” wide)
HEAVY DUTY STAKE BODY
Standard Features:
-42″ or 48″ high weld-on bulkhead with screened window. Also available in 54” or 60” high
-3/4” LED Marker and clearance light kit meets (FMVSS108) Includes wiring harness
-Primed and painted black, (other colors available)
-Structural channel long sills | 8’6” – 14’6” 6” x 8.2 lb. channel | 16’6” – 20’6” 7” x 9.8 lb. channel | 22’6” – 26’6” 8” x 11.5 lb channel
-3” Structural channel crossmembers 12” o.c.
-4” Structural channel rear rail
-10 ga. smooth steel floor or shiplapped KDAT pine floor
-10 ga. formed side rails
-3/16” heavy duty exterior stake pockets with 3/8” x 2” rub rail on sides and rear
-Standard overall width 96” (optional 102” wide)
