Clearance Inventory For Sale

WHEEL SEAL - The SKF/Chicago Rawhide (CR) 35058 is a premium, unitized front steer axle wheel seal, often designated as Scotseal PlusXL (35058XL/35058XT). It is designed for heavy-duty truck steer axles, featuring a 3.50" shaft, 4.84"–4.85...

Stock #	#CHR35058

HOSE JOINER - "CPL200" from Gibson Stainless & Specialty Inc. is a 2-inch Stainless Steel Conduit Coupling, not a hose joiner. Key Description & Specifications for Gibson CPL200: - Product: 2-inch Stainless Steel Coupling (Part # CPL2...

Stock #	#CPL200

PTO ROCKER SWITCH DUAL ACT - The Muncie Power Products 30T37620 is a heavy-duty, 6-terminal FA-style rocker switch designed for safe, electric-shift PTO engagement in vocational vehicles. It features a double-tap, dual-action mechanism—pre...

Stock #	#30T37620

PRESSURE SWITCH - The Muncie 30T60223 is a 7/16" SAE pressure switch designed as a replacement safety sensor for HS24 Power Take-Off (PTO) systems. It monitors hydraulic or air pressure to ensure proper PTO engagement, protecting the system ...

Stock #	#30T60223

PTO PRESSURE SWITCH - The Muncie Power Products 30T60228 is a heavy-duty, 1/8" NPT threaded electrical pressure switch designed for Muncie HS24 series electric/hydraulic shift PTO systems. This high-quality, durable sensor monitors hydraulic...

Stock #	#30T60228

License lamp - The Truck-Lite 33010C is a compact, 3/4-inch round, 12V LED license plate lamp, featuring a single-diode, sealed, and hardwired design, commonly used in automotive and heavy-duty applications. It includes a protective black ...

Stock #	#33010C

Harness - The Muncie Power Products 34T43730 is a wire harness designed for FR66 series PTOs, specifically for 2017+ Ford vehicles with 10R140 transmissions. It is primarily configured for "stationary mode" operation from the factory, used f...

Stock #	#34T43730

CAP PLUG - The Stemco 359-5915 is a 3/4-inch (0.75 in) red rubber mini-vent plug designed for heavy-duty commercial vehicle wheel-end hub caps. It is used to seal the hub cap fill hole, allowing for pressure equalization while preventing co...

Stock #	#359-5915

CAP PLUG - The Stemco 359-5990 is a red, 1-1/8 inch (1.125") diameter rubber vent plug designed for oil-filled hub caps on commercial trucks and trailers. It is used to seal the hub cap fill hole, prevent oil leakage, and regulate internal ...

Stock #	#359-5990

VALVE BLOCK - The Muncie 35T37928 is a 12-volt DC solenoid-operated valve block assembly designed for hydraulic, heavy-duty applications such as dump trucks, PTO (Power Take-Off) systems, and roll-back carriers. It is used to control the f...

Stock #	#35T37928

SOLENOID VALVE - The Muncie 35T40860 is a 12-volt DC hydraulic solenoid valve designed for use with Muncie CS10 and CS20 series Power Take-Offs (PTOs), commonly found on dump trucks. It acts as a direct replacement for controlling the flow ...

Stock #	#35T40860

LED FLX-LT - The Truck-Lite 36105R is a 36 Series Flex-Lite Red LED marker/clearance lamp, often referred to as a "tape-on" or surface-mount light, designed for easy, screw-free installation on commercial trucks and trailers. Key Feature...

Stock #	#36105R

OIL SEAL - The National 370003A is a premium, unitized, oil bath wheel seal designed for heavy-duty drive axle applications (typically 38,000 lb to 48,000 lb axles). It is known for its durability in severe environments, featuring a spring...

Stock #	#370003A

HUB SEAL - The Stemco 372-7097 is a heavy-duty, two-piece Grit Guard® wheel seal designed for trailer axles. It is engineered to keep oil or grease inside the hub assembly while preventing contaminants like dirt and moisture from entering...

Stock #	#372-7097

HUB SEAL SET - The Stemco 372-7098 is a Grit Guard® wheel seal set designed specifically for heavy-duty 19,000 lb trailer axles. It is a two-piece, hub-installed seal system frequently used on Dana, Eaton, Meritor, and Standard Forge axl...

Stock #	#372-7098

HUB SEAL - The STEMCO 372-7099 is a high-performance, two-piece Grit Guard® wheel seal designed for heavy-duty trailer axles. It is specifically engineered to provide a robust, long-lasting seal in severe-duty environments, often used on ...

Stock #	#372-7099

CARTRIDGE VALVE - The Chelsea 380123-12 is a 12-volt, 25-watt, non-regulating hydraulic cartridge valve designed for Parker Chelsea Power Take-Off (PTO) systems. It is specifically designed for the 277 Series PTO and is often used in Allis...

Stock #	#380123-12

RH PULL HANDLE - The 39-504-2 RH PULL HANDLE (SKU: 39-504-2) available at Mill Supply is a right-hand, curb-side handle designed for Todco Rollaramp loading ramps used on commercial trucks and stepvans. Key Product Details: - Descrip...

Stock #	#39-504-2

GASKET -The Ford 3C3Z-7223-AA is a genuine OEM transmission power take-off (PTO) cover gasket designed for 5R110W automatic transmissions. It is specifically designed to provide a seal for the transmission housing access cover on variou...

Stock #	#3C3Z7223AA